DatacenterDisk
Seagate

Seagate IronWolf Pro 10TB NAS ST10000NEZ008

ST10000NEZ008
IronWolf PronasCMR10TBSATA-6G3.5"
$48.90/TB
$488.97
newIn Stock
Price updated
Aug 4, 2026, 10:00 AM
Buy on Amazon →
Quick Verdict

The Seagate IronWolf Pro 10TB NAS ST10000NEZ008 is a 10TB SATA-6G enterprise drive at $48.90/TB - CMR recording makes it safe for all RAID levels and NAS deployments. New unit with full 5-year warranty.

Share:WhatsAppFacebookPost on X

Specifications

Capacity10TB
Form Factor3.5"
InterfaceSATA-6G
Recording TechCMR
RPM—
Cache256MB
Sector Size—
Workload Rating300TB/yr
Warranty5 years
ASINB085Z423DR

90-Day Price History

Price history will appear here after 24 hours.

Check back tomorrow.

How it compares - 10TB SATA-6G
#1HGST Ultrastar He10 10TB SATA NAS
$22.50/TB
#2MDD 10TB SATA 6G 7200RPM Enterprise
$26.00/TB
#3MDD 10TB SATA 6G 7200RPM NAS
$27.90/TB
#4Seagate IronWolf 10TB NAS ST10000VN0004
$30.00/TB
#5HGST Ultrastar He10 10TB SATA NAS
$30.51/TB

Compare to similar 10TB SATA-6G drives

HGST
Ultrastar He10 10TB SATA NAS
$22.50/TB
$224.99
REFURB
MDD
10TB SATA 6G 7200RPM Enterprise
$26.00/TB
$259.99
new
MDD
10TB SATA 6G 7200RPM NAS
$27.90/TB
$278.99
new
Seagate
IronWolf 10TB NAS ST10000VN0004
$30.00/TB
$299.99
REFURB
HGST
Ultrastar He10 10TB SATA NAS
$30.51/TB
$305.13
REFURB

Frequently Asked Questions

Yes. The IronWolf Pro 10TB NAS ST10000NEZ008 uses CMR recording which is fully compatible with all RAID levels. It is rated for 300TB/year workload.

5-year manufacturer warranty.

Compatible with any server, NAS or workstation with a SATA port. Works in Synology, QNAP, TrueNAS, UnRAID and all major NAS platforms.

Use Case Scenarios

🏠
Home & SMB NAS
Building a mid-range NAS for media, backups and file sharing.
✓ Excellent fit
CMR recording is RAID-safe and fully compatible with Synology, QNAP, TrueNAS and UnRAID. New drives come with full warranty.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
10TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.
🏗️
Virtualization Host Storage
VM images and snapshots on Proxmox, VMware or Hyper-V.
~ Good fit
Suitable for VM storage where workloads are not IOPS-intensive. SATA is fine for single-host VM storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Establishes baseline for future comparison.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 5 hours for 10TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check Seagate support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 10TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: Loose SATA data or power cable, failed port, or drive not spinning up.
Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.