Seagate

Seagate SkyHawk AI 10.0TB

ST10000VEZ008
SkyHawk AI10TBSATA-6G3.5"
$47.39/TB
$473.94
newIn Stock
Price updated
Price accurate as of Sep 18, 2026, 06:00 PM
Buy on Amazon โ†’

The Seagate SkyHawk AI 10.0TB is a 10TB SATA-6G HDD in new condition. It is in stock at $473.94 - $47.39/TB.

Same capacity, other options
DriveInterfaceCond$/TBPrice
MDD 10TB SAS 12G 7200RPM EnterpriseSAS-12GRefurb$21.00$209.99Buy
HGST Ultrastar He10 10TB SAS 12GSAS-12GRefurb$23.50$235.00Buy
WD Ultrastar 10TB SATA HUH721010ALE600SATA-6GRefurb$24.90$249.00Buy
Seagate Enterprise Capacity 10TB SAS HeliumSAS-12GRefurb$25.00$250.00Buy

All 10TB drives we track, ranked by cost per terabyte.

Model context

Part of the Seagate line we track.

Quick Verdict

The Seagate SkyHawk AI 10.0TB is a 10TB SATA-6G enterprise drive at $47.39/TB - Verify recording technology before use in RAID. New unit with full 5-year warranty.

Share:WhatsAppFacebookPost on X

Specifications

Capacity10TB
Form Factor3.5"
InterfaceSATA-6G
Recording Techโ€”
RPMโ€”
Cache256MB
Sector Sizeโ€”
Workload Rating550TB/yr
Warranty5 years
ASINB085RH2FR7
Market context

Against every other drive we have an in-stock price for today, this one is cheaper per tb than 52% of them (129 of 247). The cheapest we can currently buy is $14.99/TB; the middle of the market is $36.58/TB.

Where the wider market has moved

These are third-party figures about the retail market as a whole, quoted and dated. They are not our own measurements and they do not describe this specific drive.

Compare against every 10TB drive we track โ†’Cheapest per terabyte, all categories โ†’Category price trends โ†’
How it compares - 10TB SATA-6G
#1WD Ultrastar 10TB SATA HUH721010ALE600
$24.90/TB
#2MDD 10TB SATA 6G 7200RPM Enterprise
$26.00/TB
#3WD Ultrastar 10TB SATA HUH721010ALE600
$26.00/TB
#4Seagate IronWolf 10TB NAS ST10000VN0004
$27.50/TB
#5WD Ultrastar 10TB SATA HUH721010ALE600
$27.99/TB

Frequently Asked Questions

Check the recording technology before using in RAID. CMR is preferred over SMR for RAID arrays.

5-year manufacturer warranty.

Compatible with any server, NAS or workstation with a SATA port. Works in Synology, QNAP, TrueNAS, UnRAID and all major NAS platforms.

Use Case Scenarios

๐Ÿ 
Home & SMB NAS
Building a mid-range NAS for media, backups and file sharing.
โœ“ Excellent fit
Verify CMR recording before using in RAID. New drives come with full warranty.
๐Ÿ’พ
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
โœ“ Excellent fit
10TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.
๐Ÿ—๏ธ
Virtualization Host Storage
VM images and snapshots on Proxmox, VMware or Hyper-V.
~ Good fit
Suitable for VM storage where workloads are not IOPS-intensive. SATA is fine for single-host VM storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Establishes baseline for future comparison.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX โ€” takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX โ€” full surface scan, takes 5 hours for 10TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check Seagate support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 10TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: Loose SATA data or power cable, failed port, or drive not spinning up.
Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.