Seagate

Seagate Enterprise Capacity 10TB SAS Helium

ST10000NM0096
Enterprise CapacitynearlineCMR10TBSAS-12G3.5"
$47.45/TB
$474.45
newIn Stock
Price updated
Price accurate as of Sep 3, 2026, 06:31 PM
Buy on Amazon →

The Seagate Enterprise Capacity 10TB SAS Helium is a 10TB SAS-12G HDD in new condition. It is in stock at $474.45 - $47.45/TB.

Part number: ST10000NM0096 — decoded, with sibling variants and the warranty check.

Before you buy: this is a SAS drive

SAS drives do not plug into a normal SATA motherboard port. You need a SAS host bus adapter or a backplane that speaks SAS - an LSI/Broadcom HBA in IT mode is the usual answer. A SATA drive will run on a SAS controller, but not the other way round. HBA and IT-mode guide

Same capacity, other options
DriveInterfaceCond$/TBPrice
MDD 10TB SAS 12G 7200RPMSAS-12GNew$23.00$229.99Buy
HGST Ultrastar He10 10TB SAS 12GSAS-12GRefurb$23.50$235.00Buy
WD Ultrastar 10TB SATA HUH721010ALE600SATA-6GRefurb$25.90$259.00Buy
WD Ultrastar 10TB SATA HUH721010ALE600SATA-6GRefurb$26.00$259.99Buy

All 10TB drives we track, ranked by cost per terabyte.

Model context

Part of the Seagate line we track.

Quick Verdict

The Seagate Enterprise Capacity 10TB SAS Helium is a 10TB SAS-12G enterprise drive at $47.45/TB - CMR recording makes it safe for all RAID levels and NAS deployments. New unit with full 5-year warranty.

Share:WhatsAppFacebookPost on X

Specifications

Capacity10TB
Form Factor3.5"
InterfaceSAS-12G
Recording TechCMR
RPM7200
Cache
Sector Size512e
Workload Rating550TB/yr
Warranty5 years
ASINB06XK2FXPT
Market context

Against every other drive we have an in-stock price for today, this one is cheaper per tb than 88% of them (216 of 245). The cheapest we can currently buy is $14.99/TB; the middle of the market is $36.00/TB.

Where the wider market has moved

These are third-party figures about the retail market as a whole, quoted and dated. They are not our own measurements and they do not describe this specific drive.

Compare against every 10TB drive we track →Cheapest per terabyte, all categories →Category price trends →
How it compares - 10TB SAS-12G
#1MDD 10TB SAS 12G 7200RPM Enterprise
$14.00/TB
#2MDD 10TB SAS 12G 7200RPM
$23.00/TB
#3HGST Ultrastar He10 10TB SAS 12G
$23.50/TB
#4Seagate Enterprise Capacity 10TB SAS HeliumTHIS DRIVE
$25.00/TB
#5HGST Ultrastar He10 10TB SAS
$26.53/TB

Frequently Asked Questions

Yes. The Enterprise Capacity 10TB SAS Helium uses CMR recording which is fully compatible with all RAID levels. It is rated for 550TB/year workload.

5-year manufacturer warranty.

Compatible with any server or workstation equipped with a SAS HBA or SAS backplane. Tested with Dell PowerEdge, HPE ProLiant, Supermicro and IBM System x platforms.

Use Case Scenarios

🏠
Home & SMB NAS
Building a mid-range NAS for media, backups and file sharing.
✓ Excellent fit
CMR recording is RAID-safe and fully compatible with Synology, QNAP, TrueNAS and UnRAID. New drives come with full warranty.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
10TB SAS drives are ideal for backup targets. Dual-port SAS suits dual-path backup infrastructure.
🏗️
Virtualization Host Storage
VM images and snapshots on Proxmox, VMware or Hyper-V.
~ Good fit
Suitable for VM storage where workloads are not IOPS-intensive. SAS dual-port suits HA cluster shared storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Establishes baseline for future comparison.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 5 hours for 10TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check Seagate support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 10TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: HBA not initialized, SAS expander issue, cable fault, or incompatible controller.
Fix: Verify HBA firmware. Check SAS topology with sas2ircu or StorCLI. Test with known-good cable. Confirm drive is SAS not SATA.