DE Deutsch

Western Digital 10TB SATA Enterprise HDD - Prices

2 drives tracked. From $34.99/TB. Updated about once a day.

Buy or Skip?
✓ Buy if: you specifically need Western Digital at this capacity for compatibility.
✗ Skip if: you require new-only drives for production RAID or need guaranteed OEM warranty - consider new alternatives.
Buy on Amazon $349.95
Best $/TB
$34.99
Drives
1
Condition
Refurb

At $34.99/TB, Western Digital 10TB SATA drives are $8.48/TB cheaper than the 10TB SATA category average of $43.47/TB — strong value at this capacity.

Western Digital 10TB SATA - worth it?

Western Digital 10TB SATA enterprise drives available from $34.99/TB. Compatible with all SATA controllers, NAS, and server platforms.

Condition
Capacity
1 of 1 part numbers
  • $34.99/TB$349.95
    Western Digital 10TB WD Purple Surveillance Internal Hard Drive HDD - SATA 6 Gb/s, 256 MB Cache, 3.5" - WD102PURZ
    WD102PURZ
    10TB · SATA
    Refurb

Guides for this capacity: best 10TB hard drive · the HDD price forecast · fill a NAS at today's prices

Drive Specifications

Western Digital 10TB WD Purple Surveillance Internal Hard Drive HDD - SATA 6 Gb/s, 256 MB Cache, 3.5" - WD102PURZ
WD102PURZ
REFURB
This offer: sold by ALL4COMPUTERS ----- SIGNATURE REQUIRED ----- · Amazon says Used / Good · ALL4COMPUTERS ----- SIGNATURE REQUIRED -----'s note: 5 YEAR DEALER WARRANTY - 100% SATISFACTION GUARANTEED.
$34.99/TB
$349.95 total
Capacity
10TB
Interface
SATA
Form Factor
3.5
Recording
Not sourced
RPM
N/A
Cache
N/A
Sector Size
—
Workload
—
Warranty
—

Other Western Digital SATA capacities

Other brands at 10TB SATA

Frequently Asked Questions

1 in-stock listing out of 2 tracked; the cheapest is the Western Digital Western Digital 10TB WD Purple Surveillance Internal Hard Drive HDD - SATA 6 Gb/s, 256 MB Cache, 3.5" - WD102PURZ at $349.95 ($34.99/TB). The table on this page is the live ranking.

All 1 in-stock listings are recertified or used, so the warranty comes from the seller rather than the manufacturer; each row shows its own claim.

None of the 2 tracked listings (including the Western Digital Western Digital 10TB WD Purple Surveillance Internal Hard Drive HDD - SATA 6 Gb/s, 256 MB Cache, 3.5" - WD102PURZ) has a manufacturer-sourced recording value yet, so this page states none - an unsourced drive is never assumed CMR.

Use Case Scenarios

🏠
Home & SMB NAS
Building a mid-range NAS for media, backups and file sharing.
✓ Excellent fit
Verify CMR recording before using in RAID. Refurb units offer strong value for non-critical NAS.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
10TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.
🏗️
Virtualization Host Storage
VM images and snapshots on Proxmox, VMware or Hyper-V.
~ Good fit
Suitable for VM storage where workloads are not IOPS-intensive. SATA is fine for single-host VM storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Critical for refurb drives — refuse any with reallocated sectors > 0.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 5 hours for 10TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check Western Digital support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 10TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: Loose SATA data or power cable, failed port, or drive not spinning up.
Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.