DatacenterDisk
Western Digital

Western Digital WD Purple 4TB WD44PURZ

WD44PURZ
WD PurpleCMR4TBSATA-6G3.5"
$48.75/TB
$194.99
newCheck Availability
Price updated
Aug 4, 2026, 08:02 PM
Buy on Amazon →
Quick Verdict

The Western Digital WD Purple 4TB WD44PURZ is a 4TB SATA-6G enterprise drive at $48.75/TB - CMR recording makes it safe for all RAID levels and NAS deployments. New unit with full 3-year warranty.

Share:WhatsAppFacebookPost on X

Specifications

Capacity4TB
Form Factor3.5"
InterfaceSATA-6G
Recording TechCMR
RPM—
Cache128MB
Sector Size—
Workload Rating180TB/yr
Warranty3 years
ASINB0G6BSNYZ8

90-Day Price History

Price history will appear here after 24 hours.

Check back tomorrow.

How it compares - 4TB SATA-6G
#1Western Digital WD Purple 4TB WD40PURX
$22.50/TB
#2WD Ultrastar 7K4000 4TB SATA NAS
$27.00/TB
#3Western Digital WD Purple 4TB WD40PURX
$34.25/TB
#4Seagate IronWolf 4TB NAS ST4000VN006
$35.59/TB
#5Seagate SkyHawk 4TB ST4000VX007
$37.50/TB

Compare to similar 4TB SATA-6G drives

Western Digital
WD Purple 4TB WD40PURX
$22.50/TB
$89.99
REFURB
WD
Ultrastar 7K4000 4TB SATA NAS
$27.00/TB
$108.00
REFURB
Western Digital
WD Purple 4TB WD40PURX
$34.25/TB
$137.00
REFURB
Seagate
IronWolf 4TB NAS ST4000VN006
$35.59/TB
$142.35
REFURB
Seagate
SkyHawk 4TB ST4000VX007
$37.50/TB
$149.99
REFURB

Frequently Asked Questions

Yes. The WD Purple 4TB WD44PURZ uses CMR recording which is fully compatible with all RAID levels. It is rated for 180TB/year workload.

3-year manufacturer warranty.

Compatible with any server, NAS or workstation with a SATA port. Works in Synology, QNAP, TrueNAS, UnRAID and all major NAS platforms.

Use Case Scenarios

🏠
Home & SMB NAS
Building a mid-range NAS for media, backups and file sharing.
✓ Excellent fit
CMR recording is RAID-safe and fully compatible with Synology, QNAP, TrueNAS and UnRAID. New drives come with full warranty.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
4TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.
🏗️
Virtualization Host Storage
VM images and snapshots on Proxmox, VMware or Hyper-V.
~ Good fit
Suitable for VM storage where workloads are not IOPS-intensive. SATA is fine for single-host VM storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Establishes baseline for future comparison.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 2 hours for 4TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check Western Digital support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 4TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: Loose SATA data or power cable, failed port, or drive not spinning up.
Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.