DatacenterDisk
Seagate

Seagate BarraCuda 4TB ST4000DMZ04

ST4000DMZ04
BarraCudadesktopSMR4TBSATA-6G3.5"
$47.50/TB
$190.00
REFURBIn Stock
Price updated
Aug 4, 2026, 11:56 AM
Buy on Amazon →
Quick Verdict

The Seagate BarraCuda 4TB ST4000DMZ04 is a 4TB SATA-6G enterprise drive at $47.50/TB - Verify recording technology before use in RAID. As a refurbished unit, run SMART diagnostics on arrival and verify power-on hours.

Share:WhatsAppFacebookPost on X

Specifications

Capacity4TB
Form Factor3.5"
InterfaceSATA-6G
Recording TechSMR
RPM5400
Cache256MB
Sector Size—
Workload Rating—
Warranty—
ASINB07D9C7SQH

90-Day Price History

Price history will appear here after 24 hours.

Check back tomorrow.

How it compares - 4TB SATA-6G
#1WD Ultrastar 7K4000 4TB SATA NAS
$27.00/TB
#2Seagate ST4000NM0033 4TB SATA Enterprise
$28.50/TB
#3Seagate IronWolf 4TB NAS ST4000VN006
$35.59/TB
#4Seagate IronWolf 4TB NAS
$41.46/TB
#5Seagate ST4000NM0033 4TB SATA Enterprise
$44.75/TB

Compare to similar 4TB SATA-6G drives

WD
Ultrastar 7K4000 4TB SATA NAS
$27.00/TB
$108.00
REFURB
Seagate
ST4000NM0033 4TB SATA Enterprise
$28.50/TB
$114.00
new
Seagate
IronWolf 4TB NAS ST4000VN006
$35.59/TB
$142.35
REFURB
Seagate
IronWolf 4TB NAS
$41.46/TB
$165.84
REFURB
Seagate
ST4000NM0033 4TB SATA Enterprise
$44.75/TB
$179.00
REFURB

Frequently Asked Questions

Check the recording technology before using in RAID. CMR is preferred over SMR for RAID arrays.

Warranty varies by seller. Check the Amazon listing for current warranty terms.

Compatible with any server, NAS or workstation with a SATA port. Works in Synology, QNAP, TrueNAS, UnRAID and all major NAS platforms.

Use Case Scenarios

🏠
Home & SMB NAS
Building a mid-range NAS for media, backups and file sharing.
✓ Excellent fit
Verify CMR recording before using in RAID. Refurb units offer strong value for non-critical NAS.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
4TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.
🏗️
Virtualization Host Storage
VM images and snapshots on Proxmox, VMware or Hyper-V.
~ Good fit
Suitable for VM storage where workloads are not IOPS-intensive. SATA is fine for single-host VM storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Critical for refurb drives — refuse any with reallocated sectors > 0.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 2 hours for 4TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check Seagate support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 4TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: Loose SATA data or power cable, failed port, or drive not spinning up.
Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.