DatacenterDisk

WD 14TB SATA Enterprise HDD - Prices

2 drives tracked. From $17.14/TB. Updated every 4 hours.

Buy or Skip?
✓ Buy if: you want 8% below-average pricing on 14TB WD drives. These are datacenter pulls - verify SMART data on arrival.
✗ Skip if: you require new-only drives for production RAID or need guaranteed OEM warranty - consider new alternatives.
Buy on Amazon → $239.99
Best $/TB
$17.14
Drives
2
Condition
New + Refurb

At $17.14/TB, WD 14TB SATA drives are $1.43/TB cheaper than the 14TB SATA category average of $18.57/TB — strong value at this capacity.

WD 14TB SATA - worth it?

WD 14TB SATA drives include the Ultrastar DC enterprise line and Red Pro NAS series. Both use CMR recording and carry 5-year warranties. From $17.14/TB.

$/TB ▲Brand / ModelCapInterfaceTechCacheSectorWtyPriceCond.90DBuy
👑$17.14
↓ Good
WD
Ultrastar DC HC530 14TB SATA 4Kn NAS
WUH721414ALN604
Refurb · CMR · 5yr
14TB
SATA-6G
7,200 RPM
CMR512MB4Kn5yr$239.99REFURB▲Buy →Details▼
$20.00
~ Fair
WD
Ultrastar DC HC530 14TB SATA 4Kn NAS
WUH721414ALN604
CMR · 5yr
14TB
SATA-6G
7,200 RPM
CMR512MB4Kn5yr$279.99new▲Buy →Details▼

Drive Specifications

WD Ultrastar DC HC530 14TB SATA 4Kn NAS
WUH721414ALN604
REFURB
$17.14/TB
$239.99 total
Capacity
14TB
Interface
SATA-6G
Form Factor
3.5"
Recording
CMR
RPM
7,200
Cache
512MB
Sector Size
4Kn
Workload
550TB/yr
Warranty
5 years
WD Ultrastar DC HC530 14TB SATA 4Kn NAS
WUH721414ALN604
$20.00/TB
$279.99 total
Capacity
14TB
Interface
SATA-6G
Form Factor
3.5"
Recording
CMR
RPM
7,200
Cache
512MB
Sector Size
4Kn
Workload
550TB/yr
Warranty
5 years

Other WD SATA capacities

4TB6TB8TB12TB14TB16TB18TB20TB22TB24TB

Frequently Asked Questions

WD enterprise SATA drives (Ultrastar, Gold) use CMR. WD Red non-Pro models in some capacities use SMR - always verify the model number. Red Pro and Red Plus are CMR.

WD 14TB SATA drives are compatible with all major NAS platforms including Synology DiskStation, QNAP, TrueNAS, UnRAID, and any server with SATA ports. Check your NAS manufacturer's compatibility list for confirmed models.

Both are available. New drives carry full manufacturer warranty. Refurbished units are datacenter pulls with low hours - excellent value for secondary storage and backup targets.

Use Case Scenarios

🏠
Home & SMB NAS
Building a high-capacity NAS for media, backups and file sharing.
✓ Excellent fit
CMR recording is RAID-safe and fully compatible with Synology, QNAP, TrueNAS and UnRAID. Refurb units offer strong value for non-critical NAS.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
14TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.
🏗️
Virtualization Host Storage
VM images and snapshots on Proxmox, VMware or Hyper-V.
~ Good fit
Suitable for VM storage where workloads are not IOPS-intensive. SATA is fine for single-host VM storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Critical for refurb drives — refuse any with reallocated sectors > 0.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 7 hours for 14TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check WD support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 14TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: Loose SATA data or power cable, failed port, or drive not spinning up.
Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.