DatacenterDisk

HGST 1.2TB SAS Enterprise HDD - Prices

3 HGST 1.2TB SAS hard drives tracked. Prices from $41.67/TB. Updated every 4 hours.

Buy or Skip?
✓ Buy if: you want 5% below-average pricing on 1.2TB HGST drives. These are datacenter pulls - verify SMART data on arrival.
✗ Skip if: you require new-only drives for production RAID or need guaranteed OEM warranty - consider new alternatives.
Buy on Amazon → $50.00
Best $/TB
$41.67
Drives
3
Condition
New + Refurb

At $41.67/TB, HGST 1.2TB SAS drives are $4.44/TB cheaper than the 1.2TB SAS category average of $46.11/TB — strong value at this capacity.

HGST 1.2TB SAS - should you buy?

HGST Ultrastar 1.2TB SAS drives are the reliability benchmark for enterprise HDD. Hyperscale datacenter pulls at $41.67/TB offer exceptional value.

$/TB ▲Brand / ModelCapInterfaceTechCacheSectorWtyPriceCond.90DBuy
👑$41.67
~ Fair
HGST
1.2TB 10K SAS 12G 2.5
HUC101212CSS600
Refurb · CMR ·
1.2TB
SAS-12G
10,000 RPM
CMR—512e—$50.00REFURB▲Buy →Details▼
$45.00
~ Fair
HGST
1.2TB 10K SAS 12G 2.5
HUC101212CSS600
CMR ·
1.2TB
SAS-12G
10,000 RPM
CMR—512e—$54.00New▲Buy →Details▼
$45.00
~ Fair
HGST
1.2TB 10K SAS 12G 2.5
HUC101212CSS600
CMR ·
1.2TB
SAS-12G
10,000 RPM
CMR—512e—$54.00new▲Buy →Details▼

Drive Specifications

HGST 1.2TB 10K SAS 12G 2.5
HUC101212CSS600
REFURB
$41.67/TB
$50.00 total
Capacity
1.2TB
Interface
SAS-12G
Form Factor
2.5"
Recording
CMR
RPM
10,000
Cache
N/A
Sector Size
512e
Workload
—
Warranty
—
HGST 1.2TB 10K SAS 12G 2.5
HUC101212CSS600
$45.00/TB
$54.00 total
Capacity
1.2TB
Interface
SAS-12G
Form Factor
2.5"
Recording
CMR
RPM
10,000
Cache
N/A
Sector Size
512e
Workload
—
Warranty
—
HGST 1.2TB 10K SAS 12G 2.5
HUC101212CSS600
$45.00/TB
$54.00 total
Capacity
1.2TB
Interface
SAS-12G
Form Factor
2.5"
Recording
CMR
RPM
10,000
Cache
N/A
Sector Size
512e
Workload
—
Warranty
—

Other HGST SAS capacities

1.2TB3TB4TB6TB8TB10TB12TB14TB

Other brands at 1.2TB SAS

DellHGSTHPSeagate

Frequently Asked Questions

HGST Ultrastar SAS drives have among the lowest annualized failure rates in the industry. Widely deployed in hyperscale datacenters by Google, Microsoft, and Amazon.

Both are available. Refurbished HGST SAS drives are typically low-hours datacenter pulls - excellent value for non-critical storage. New drives with full warranty are recommended for production RAID arrays.

At 1.2TB, RAID 1 mirrors or RAID 5 are typical. These smaller capacities rebuild quickly, reducing the window of vulnerability.

Use Case Scenarios

🏠
Home & SMB NAS
Building a mid-range NAS for media, backups and file sharing.
~ Good fit
CMR recording is RAID-safe and fully compatible with Synology, QNAP, TrueNAS and UnRAID. Refurb units offer strong value for non-critical NAS.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
1.2TB SAS drives are ideal for backup targets. Dual-port SAS suits dual-path backup infrastructure.
🏗️
Virtualization Host Storage
VM images and snapshots on Proxmox, VMware or Hyper-V.
~ Good fit
Suitable for VM storage where workloads are not IOPS-intensive. SAS dual-port suits HA cluster shared storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Critical for refurb drives — refuse any with reallocated sectors > 0.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 1 hours for 1.2TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check HGST support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 1.2TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: HBA not initialized, SAS expander issue, cable fault, or incompatible controller.
Fix: Verify HBA firmware. Check SAS topology with sas2ircu or StorCLI. Test with known-good cable. Confirm drive is SAS not SATA.