WD

WD WD Gold 8TB

WD8003FRYZ
WD GoldCMR8TBSATA-6G3.5"
$68.63/TB
$549.00
newIn Stock
Price updated
Price accurate as of Aug 14, 2026, 12:31 PM
Buy on Amazon →
Quick Verdict

The WD WD Gold 8TB is a 8TB SATA-6G enterprise drive at $68.63/TB - CMR recording makes it safe for all RAID levels and NAS deployments. New unit with full 5-year warranty.

Share:WhatsAppFacebookPost on X

Specifications

Capacity8TB
Form Factor3.5"
InterfaceSATA-6G
Recording TechCMR
RPM7200
Cache
Sector Size
Workload Rating
Warranty5 years
ASINB074WH5NPT
Market context

Against every other drive we have an in-stock price for today, this one is cheaper per tb than 89% of them (232 of 262). The cheapest we can currently buy is $14.00/TB; the middle of the market is $37.58/TB.

Where the wider market has moved

These are third-party figures about the retail market as a whole, quoted and dated. They are not our own measurements and they do not describe this specific drive.

Compare against every 8TB drive we track →Cheapest per terabyte, all categories →Category price trends →
How it compares - 8TB SATA-6G
#1WD WD Gold 8TBTHIS DRIVE
$26.13/TB
#2WD WD Red Plus 8TB WD80EFPX
$30.43/TB
#3Seagate BarraCuda 8TB ST8000DMZ04
$30.55/TB
#4Seagate BarraCuda 8TB ST8000DMZ04
$33.75/TB
#5WD WD Red Plus 8TB WD80EFZX
$36.37/TB

Frequently Asked Questions

Yes. The WD Gold 8TB uses CMR recording which is fully compatible with all RAID levels.

5-year manufacturer warranty.

Compatible with any server, NAS or workstation with a SATA port. Works in Synology, QNAP, TrueNAS, UnRAID and all major NAS platforms.

Use Case Scenarios

🏠
Home & SMB NAS
Building a mid-range NAS for media, backups and file sharing.
✓ Excellent fit
CMR recording is RAID-safe and fully compatible with Synology, QNAP, TrueNAS and UnRAID. New drives come with full warranty.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
8TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.
🏗️
Virtualization Host Storage
VM images and snapshots on Proxmox, VMware or Hyper-V.
~ Good fit
Suitable for VM storage where workloads are not IOPS-intensive. SATA is fine for single-host VM storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Establishes baseline for future comparison.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 4 hours for 8TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check WD support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 8TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: Loose SATA data or power cable, failed port, or drive not spinning up.
Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.