Solidigm D5-P5336 Enterprise SSD
The Solidigm D5-P5336 is a capacity-optimized PCIe 4.0 NVMe SSD family ranging from 7.68TB to 122.88TB. Its value is density and read economics, not write-heavy database endurance.
Current exact listings remain visible even when a public price is temporarily absent. Price and price per TB appear only when the matching listing is currently offered.
D5-P5336 specifications
| Manufacturer | Solidigm |
|---|---|
| Product family | D5-P5336 |
| Positioning | PCIe 4.0 capacity SSD |
| NAND | 192-layer QLC 3D NAND |
| Interface | PCIe 4.0 x4, NVMe 2.0 |
| Form factors | U.2 15mm, E3.S 7.5mm and E1.L 9.5mm; ordering options vary by capacity |
| Capacities | 7.68, 15.36, 30.72, 61.44 and 122.88TB |
| Sequential performance | Up to 7,000 MB/s read and 3,300 MB/s write |
| Random performance | Up to 1.005M random-read IOPS; write performance varies by capacity |
| Endurance | 0.42 to 0.60 DWPD over five years; 5.9 to 134.3 PBW by capacity |
| Warranty | Five-year limited warranty |
| Primary workload | Read-intensive data lakes, object storage, CDN, scale-out storage and large AI datasets |
No exact current public offer is available for this product family. Specifications and buying guidance remain available without substituting an unrelated SSD.
Where D5-P5336 fits
P5336 reduces device count for large repositories. A 122.88TB drive can replace four 30.72TB devices on raw capacity, which can free bays and controller lanes, but it also concentrates more data and rebuild exposure in each failure domain.
The family is a good match for sequential and random reads from mostly stable data. It is a weaker fit for sustained small-block overwrites, write caches or high-churn databases where mixed-use TLC or SLC endurance is more appropriate.
QLC endurance and workload planning
Solidigm publishes capacity-dependent endurance from 0.42 to 0.60 DWPD over five years. Translate the selected drive's PBW limit into expected host writes after compression, compaction, garbage collection and application write amplification.
A workload described as read intensive can still generate substantial background writes. Object metadata, erasure coding, checkpoints and rebalancing all count, so capacity planning should include measured write telemetry rather than relying on a workload label.
Server and storage platform requirements
PCIe 4.0 x4 is the electrical interface, but the physical installation depends on the chosen form factor. Confirm bay geometry, backplane wiring, hot-plug support, BIOS and NVMe firmware qualification, thermal envelope and lane allocation.
Large QLC drives may also expose namespace or logical-block-format choices relevant to an array. Keep firmware and formatting consistent across a protection group unless the platform vendor explicitly supports a mixed configuration.
Frequently asked questions
Is Solidigm D5-P5336 TLC or QLC?
It uses 192-layer QLC 3D NAND and is positioned for read-intensive capacity storage.
What is the largest D5-P5336 capacity?
The current family reaches 122.88TB.
Can D5-P5336 be used for a write-heavy database?
It can operate as enterprise NVMe storage, but its endurance profile is not the preferred choice for sustained write-heavy activity. Measure writes and compare PS1030 or P5810 where endurance is the limiting requirement.
Sources checked: Solidigm D5-P5336 product page and product brief.
Specifications are manufacturer-published maxima and vary by capacity, form factor, firmware and test conditions. Current price appears only for a matching product that is presently offered.