This offer: sold by Rippid (S/N Recorded) · Amazon says Used / LikeNew · Rippid (S/N Recorded)'s note: ITEM COMES IN ORIGINAL PACKING - MISSING SCREWS AND MANUAL- ITEM IS NEW- NO DAMAGES OR SIGN OF USE
The WD Red Pro 26TB NAS WD260KFGX is a 26TB SATA-6G HDD in used condition. It is in stock at $1,299.99 - $50.00/TB.
Where this listing sits: 26TB SATA drives — each page is the live ranking for that slice of the catalogue.
This is a refurbished or recertified listing
Recertified enterprise drives are pulled from datacentre fleets, tested and resold. They are usually the cheapest route to bulk capacity, and the risk is concentrated in the first weeks - so check SMART data the day it arrives rather than the day you need it. What recertified means · Refurbished warranty terms · Verify on arrival
The WD Red Pro 26TB NAS WD260KFGX is a 26TB SATA-6G enterprise drive at $50.00/TB - CMR recording makes it safe for all RAID levels and NAS deployments. As a refurbished unit, run SMART diagnostics on arrival and verify power-on hours.
Against every other drive we have an in-stock price for today, this one is cheaper per tb than 24% of them (58 of 243). The cheapest we can currently buy is $14.99/TB; the middle of the market is $37.99/TB.
These are third-party figures about the retail market as a whole, quoted and dated. They are not our own measurements and they do not describe this specific drive.
Resolved against manufacturer compatibility lists we read and dated, capped at 4. Vendor-listed means the manufacturer names this exact part number; fit-verified is our own check of form factor, interface and recording technology against a published requirement. Neither is a guess, and a drive the registry cannot resolve shows nothing here rather than a maybe. How compatibility actually works
Yes. At our last check it was $1,299.99 ($50.00 per terabyte at its 26TB capacity), sold used under ASIN B0DYQH1N48. Amazon sets the final price at checkout.
Amazon reports this listing (WD260KFGX) as used, and its title makes no renewed or recertified claim, so the unit's origin is whatever the seller's note says - shown beside the price.
The WD260KFGX's stored recording technology is CMR (manufacturer-sourced), which rebuilds predictably in RAID.
Use Case Scenarios
🏠
Home & SMB NAS
Building a high-capacity NAS for media, backups and file sharing.
~ Good fit
CMR recording is RAID-safe and fully compatible with Synology, QNAP, TrueNAS and UnRAID. Refurb units offer strong value for non-critical NAS.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
26TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.
☁️
Object Storage / Cold Data Tier
High-density storage for MinIO, Ceph or Hadoop at scale.
✓ Excellent fit
At 26TB per drive, a 60-bay JBOD delivers 1560TB raw — enough for petabyte-scale object storage.
Maintenance & Troubleshooting
Maintenance Checklist
On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Critical for refurb drives — refuse any with reallocated sectors > 0.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 13 hours for 26TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check WD support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 26TB per drive, budget for replacements before failures occur.
Troubleshooting Guide
Cause: Loose SATA data or power cable, failed port, or drive not spinning up.
Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.