Seagate

Seagate SkyHawk AI 14TB ST14000VE0008

ST14000VE0008
SkyHawk AI14TBSATA-6G3.5"
$51.79/TB
$725.00
newIn Stock
Price updated
Aug 4, 2026, 09:00 PM
Buy on Amazon →
Quick Verdict

The Seagate SkyHawk AI 14TB ST14000VE0008 is a 14TB SATA-6G enterprise drive at $51.79/TB - Verify recording technology before use in RAID. New unit with full 5-year warranty.

Share:WhatsAppFacebookPost on X

Specifications

Capacity14TB
Form Factor3.5"
InterfaceSATA-6G
Recording Tech
RPM
Cache
Sector Size
Workload Rating550TB/yr
Warranty5 years
ASINB07K2XBM66

90-Day Price History

Price history will appear here after 24 hours.

Check back tomorrow.

How it compares - 14TB SATA-6G
#1WD Ultrastar DC HC530 14TB SATA 4Kn NAS
$17.14/TB
#2WD Ultrastar DC HC530 14TB SATA 4Kn NAS
$20.00/TB
#3WD Ultrastar 14TB SATA WUH721414ALE6L4
$21.71/TB
#4Toshiba MG07ACA14T 14TB SATA Enterprise
$23.50/TB
#5MDD 14TB SATA 6G 7200RPM 256MB Enterprise
$25.71/TB

Frequently Asked Questions

Check the recording technology before using in RAID. CMR is preferred over SMR for RAID arrays.

5-year manufacturer warranty.

Compatible with any server, NAS or workstation with a SATA port. Works in Synology, QNAP, TrueNAS, UnRAID and all major NAS platforms.

Use Case Scenarios

🏠
Home & SMB NAS
Building a high-capacity NAS for media, backups and file sharing.
✓ Excellent fit
Verify CMR recording before using in RAID. New drives come with full warranty.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
14TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.
🏗️
Virtualization Host Storage
VM images and snapshots on Proxmox, VMware or Hyper-V.
~ Good fit
Suitable for VM storage where workloads are not IOPS-intensive. SATA is fine for single-host VM storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Establishes baseline for future comparison.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 7 hours for 14TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check Seagate support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 14TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: Loose SATA data or power cable, failed port, or drive not spinning up.
Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.