Seagate

Seagate SkyHawk 12TB ST12000VX0008

ST12000VX0008
SkyHawk12TBSATA-6G3.5"
$47.89/TB
$574.65
newIn Stock
Price updated
Aug 4, 2026, 08:30 PM
Buy on Amazon →
Quick Verdict

The Seagate SkyHawk 12TB ST12000VX0008 is a 12TB SATA-6G enterprise drive at $47.89/TB - Verify recording technology before use in RAID. New unit with full manufacturer warranty.

Share:WhatsAppFacebookPost on X

Specifications

Capacity12TB
Form Factor3.5"
InterfaceSATA-6G
Recording Tech
RPM
Cache
Sector Size
Workload Rating
Warranty
ASINB07H55KMFH

90-Day Price History

Price history will appear here after 24 hours.

Check back tomorrow.

How it compares - 12TB SATA-6G
#1WD Ultrastar 12TB SATA HUH721212ALE604
$26.67/TB
#2WD Ultrastar 12TB SATA HUH721212ALE604
$27.49/TB
#3MDD 12TB SATA 6G 7200RPM NAS
$27.50/TB
#4WD Ultrastar 12TB SATA HUH721212ALE604
$28.29/TB
#5WD Ultrastar 12TB SATA HUH721212ALE601
$28.33/TB

Frequently Asked Questions

Check the recording technology before using in RAID. CMR is preferred over SMR for RAID arrays.

Warranty varies by seller. Check the Amazon listing for current warranty terms.

Compatible with any server, NAS or workstation with a SATA port. Works in Synology, QNAP, TrueNAS, UnRAID and all major NAS platforms.

Use Case Scenarios

🏠
Home & SMB NAS
Building a high-capacity NAS for media, backups and file sharing.
✓ Excellent fit
Verify CMR recording before using in RAID. New drives come with full warranty.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
12TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.
🏗️
Virtualization Host Storage
VM images and snapshots on Proxmox, VMware or Hyper-V.
~ Good fit
Suitable for VM storage where workloads are not IOPS-intensive. SATA is fine for single-host VM storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Establishes baseline for future comparison.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 6 hours for 12TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check Seagate support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 12TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: Loose SATA data or power cable, failed port, or drive not spinning up.
Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.