WD

WD Ultrastar 24TB SATA WUH722424ALE6L4

WUH722424ALE6L4
Ultrastar HC580nearlineCMR24TBSATA-6G3.5"
$33.29/TB
$799.00
REFURBIn Stock
Price updated
Aug 4, 2026, 05:30 PM
Buy on Amazon →
Quick Verdict

The WD Ultrastar 24TB SATA WUH722424ALE6L4 is a 24TB SATA-6G enterprise drive at $33.29/TB - CMR recording makes it safe for all RAID levels and NAS deployments. As a refurbished unit, run SMART diagnostics on arrival and verify power-on hours.

Share:WhatsAppFacebookPost on X

Specifications

Capacity24TB
Form Factor3.5"
InterfaceSATA-6G
Recording TechCMR
RPM7200
Cache512MB
Sector Size512e
Workload Rating
Warranty
ASINB0D1V2LPLX

90-Day Price History

Price history will appear here after 24 hours.

Check back tomorrow.

How it compares - 24TB SATA-6G
#1WD Ultrastar 24TB SATA WUH722424ALE604
$27.88/TB
#2Seagate Exos X24 24TB Renewed
$28.75/TB
#3Seagate BarraCuda 24TB ST24000DM001
$29.58/TB
#4Seagate BarraCuda 24TB ST24000DM001
$31.21/TB
#5WD Ultrastar 24TB SATA WUH722424ALE6L4THIS DRIVE
$33.29/TB

Frequently Asked Questions

Yes. The Ultrastar 24TB SATA WUH722424ALE6L4 uses CMR recording which is fully compatible with all RAID levels.

Warranty varies by seller. Check the Amazon listing for current warranty terms.

Compatible with any server, NAS or workstation with a SATA port. Works in Synology, QNAP, TrueNAS, UnRAID and all major NAS platforms.

Use Case Scenarios

🏠
Home & SMB NAS
Building a high-capacity NAS for media, backups and file sharing.
~ Good fit
CMR recording is RAID-safe and fully compatible with Synology, QNAP, TrueNAS and UnRAID. Refurb units offer strong value for non-critical NAS.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
24TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.
☁️
Object Storage / Cold Data Tier
High-density storage for MinIO, Ceph or Hadoop at scale.
✓ Excellent fit
At 24TB per drive, a 60-bay JBOD delivers 1440TB raw — enough for petabyte-scale object storage.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Critical for refurb drives — refuse any with reallocated sectors > 0.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 12 hours for 24TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check WD support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 24TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: Loose SATA data or power cable, failed port, or drive not spinning up.
Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.