DatacenterDisk
WD

WD WD Red Legacy 1TB WD10EFRX

WD10EFRX
WD Red LegacyCMR1TBSATA-6G3.5"
$174.99/TB
$174.99
newIn Stock
Price updated
Aug 7, 2026, 09:00 PM
Buy on Amazon →
Quick Verdict

The WD WD Red Legacy 1TB WD10EFRX is a 1TB SATA-6G enterprise drive at $174.99/TB - CMR recording makes it safe for all RAID levels and NAS deployments. New unit with full manufacturer warranty.

Share:WhatsAppFacebookPost on X

Specifications

Capacity1TB
Form Factor3.5"
InterfaceSATA-6G
Recording TechCMR
RPM—
Cache—
Sector Size—
Workload Rating—
Warranty—
ASINB008JJLXO6

Price History ($/TB)

Price history for this drive appears once the tracker has recorded it for a day.

Full history for this drive is also plotted across its whole category on the price trend pages, and against every other category on the storage crisis tracker.

How it compares - 1TB SATA-6G
#1Seagate BarraCuda 1TB ST1000DM010
$48.59/TB
#2Western Digital WD Purple 1TB WD10PURX
$69.99/TB
#3WD WD Red Legacy 1TB WD10EFRXTHIS DRIVE
$87.39/TB
#4Seagate BarraCuda 1TB ST1000DMZ10
$89.99/TB
#5Seagate BarraCuda 1TB ST1000DM010
$99.99/TB

Compare to similar 1TB SATA-6G drives

Seagate
BarraCuda 1TB ST1000DM010
$48.59/TB
$48.59
REFURB
Western Digital
WD Purple 1TB WD10PURX
$69.99/TB
$69.99
REFURB
Seagate
BarraCuda 1TB ST1000DMZ10
$89.99/TB
$89.99
new
Seagate
BarraCuda 1TB ST1000DM010
$99.99/TB
$99.99
new
Seagate
SkyHawk 1.0TB
$110.00/TB
$110.00
REFURB

Frequently Asked Questions

Yes. The WD Red Legacy 1TB WD10EFRX uses CMR recording which is fully compatible with all RAID levels.

Warranty varies by seller. Check the Amazon listing for current warranty terms.

Compatible with any server, NAS or workstation with a SATA port. Works in Synology, QNAP, TrueNAS, UnRAID and all major NAS platforms.

Use Case Scenarios

🏠
Home & SMB NAS
Building a mid-range NAS for media, backups and file sharing.
~ Good fit
CMR recording is RAID-safe and fully compatible with Synology, QNAP, TrueNAS and UnRAID. New drives come with full warranty.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
1TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.
🏗️
Virtualization Host Storage
VM images and snapshots on Proxmox, VMware or Hyper-V.
~ Good fit
Suitable for VM storage where workloads are not IOPS-intensive. SATA is fine for single-host VM storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Establishes baseline for future comparison.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 1 hours for 1TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check WD support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 1TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: Loose SATA data or power cable, failed port, or drive not spinning up.
Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.