Dell

Dell VJ7CD 1.8TB 10K SAS 12G 512E

VJ7CD
PowerEdge OEMoltpCMR1.8TBSAS-12G2.5"
$80.56/TB
$145.00
newIn Stock
Price updated
Price accurate as of Sep 3, 2026, 07:31 PM
Buy on Amazon →

The Dell VJ7CD 1.8TB 10K SAS 12G 512E is a 1.8TB SAS-12G HDD in new condition. It is in stock at $145.00 - $80.56/TB.

Before you buy: this is a SAS drive

SAS drives do not plug into a normal SATA motherboard port. You need a SAS host bus adapter or a backplane that speaks SAS - an LSI/Broadcom HBA in IT mode is the usual answer. A SATA drive will run on a SAS controller, but not the other way round. HBA and IT-mode guide

Same capacity, other options
DriveInterfaceCond$/TBPrice
Toshiba 1.8TB 10K SAS 12G 2.5SAS-12GRefurb$44.03$79.25Buy

All 1.8TB drives we track, ranked by cost per terabyte.

Model context

Part of the Dell line we track.

Quick Verdict

The Dell VJ7CD 1.8TB 10K SAS 12G 512E is a 1.8TB 10K RPM SAS drive at $80.56/TB - double the random IOPS of 7200 RPM nearline. Best for OLTP and virtualization where NVMe budget is constrained.

Share:WhatsAppFacebookPost on X

Specifications

Capacity1.8TB
Form Factor2.5"
InterfaceSAS-12G
Recording TechCMR
RPM10000
Cache
Sector Size512e
Workload Rating
Warranty
ASINB07HGKK4FV
Market context

Against every other drive we have an in-stock price for today, this one is cheaper per tb than 2% of them (6 of 244). The cheapest we can currently buy is $14.99/TB; the middle of the market is $35.91/TB.

Where the wider market has moved

These are third-party figures about the retail market as a whole, quoted and dated. They are not our own measurements and they do not describe this specific drive.

Compare against every 1.8TB drive we track →Cheapest per terabyte, all categories →Category price trends →
How it compares - 1.8TB SAS-12G
#1Toshiba 1.8TB 10K SAS 12G 4Kn
$36.91/TB
#2Toshiba 1.8TB 10K SAS 12G 4Kn
$36.91/TB
#3Toshiba 1.8TB 10K SAS 12G 2.5
$44.03/TB
#4Dell VJ7CD 1.8TB 10K SAS 12G 512ETHIS DRIVE
$80.56/TB
#5HP 791034-B21 1.8TB SAS 12G 10K Enterprise
$132.22/TB

Frequently Asked Questions

Yes. The VJ7CD 1.8TB 10K SAS 12G 512E uses CMR recording which is fully compatible with all RAID levels.

Warranty varies by seller. Check the Amazon listing for current warranty terms.

Compatible with any server or workstation equipped with a SAS HBA or SAS backplane. Tested with Dell PowerEdge, HPE ProLiant, Supermicro and IBM System x platforms.

Use Case Scenarios

🏠
Home & SMB NAS
Building a mid-range NAS for media, backups and file sharing.
~ Good fit
CMR recording is RAID-safe and fully compatible with Synology, QNAP, TrueNAS and UnRAID. New drives come with full warranty.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
1.8TB SAS drives are ideal for backup targets. Dual-port SAS suits dual-path backup infrastructure.
🏦
Performance-Sensitive OLTP
10K RPM SAS for databases needing better IOPS without NVMe cost.
✓ Excellent fit
10K RPM delivers ~300 IOPS vs ~150 for 7200 RPM — double the random performance at a fraction of SSD cost. Use RAID 10 for optimal performance.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Establishes baseline for future comparison.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 1 hours for 1.8TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check Dell support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 1.8TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: HBA not initialized, SAS expander issue, cable fault, or incompatible controller.
Fix: Verify HBA firmware. Check SAS topology with sas2ircu or StorCLI. Test with known-good cable. Confirm drive is SAS not SATA.