The DP7200 is in Synology's FS, HD, SA, UC, XS+, XS, DP, and DVA/NVR series policy table. On it, an unlisted hard drive is supported for migration from an existing Synology system only - not for a new storage pool; an unlisted 2.5" SATA/SAS SSD is supported for migration from an existing Synology system only; and an unlisted M.2 NVMe SSD is supported for migration from an existing Synology system only. A drive on Synology's incompatibility list is not supported at all. Source: Synology, DSM 7.3, last updated 27 May 2026.
Page data last refreshed .
The DP7200 is an ActiveProtect backup appliance rather than a NAS you fill yourself; the DP rule matters when a drive in it is replaced.
Synology's article states: “The table below summarizes drive compatibility by product series and drive type for models released in 2025 and later:” This is the FS, HD, SA, UC, XS+, XS, DP, and DVA/NVR series table, transcribed from its merged cells. "Not Listed" is the column you are in with almost any drive bought on price.
| Drive type | On compatibility list | Not listed | On incompatibility list |
|---|---|---|---|
| HDD | Supported for new installation and storage pool creation and migration from an existing Synology system | Supported for migration from an existing Synology system | Not supported |
| 2.5" SATA/SAS SSD | Supported for new installation and storage pool creation, cache creation and migration from an existing Synology system | Supported for migration from an existing Synology system | Not supported |
| M.2 NVMe SSD | Supported for new installation and storage pool creation, cache creation and migration from an existing Synology system | Supported for migration from an existing Synology system | Not supported |
A drive on Synology's incompatibility list is not supported for a new installation or storage pool, for cache, or for migration - on every series. The incompatibility list is not the same thing as being absent from the compatibility list. A drive on it is one Synology has tested and found incompatible; Synology's Storage Manager article defines that status as “This drive is tested to be incompatible with your Synology storage system.” A drive that is merely missing from the compatibility list is "Unverified" instead - “This drive has not been verified as compatible with your Synology storage system.” - and Synology says that for such a drive its technical support “may only provide limited assistance.”
We list drives only for the bay types Synology's own spec page names, and we have not read one for the DP7200. For replacement drives, the FS, HD, SA, UC, XS+, XS, DP, and DVA/NVR series rule above applies: an unlisted hard drive is supported for migration from an existing Synology system only - not for a new storage pool.
The full Synology drive policy, every series · Same table: RS6426xs+, RS11626xs+, DVA7400, DP5200
Which models this cluster covers: those on Synology's product list (50 products, read 2026-10-05) with a 2025-or-later launch announcement in Synology's newsroom (read 2026-10-05). We do not infer a launch year from a model number.
Only by migration. The DP7200 is in Synology's FS, HD, SA, UC, XS+, XS, DP, and DVA/NVR series table, where an unlisted hard drive is supported for migration from an existing Synology system, and not for a new installation or a new storage pool. Synology attaches a condition: "Drives must be migrated directly from an existing Synology system. If the original storage pool or SSD cache is removed from the drive, the drive will no longer be usable in your current Synology system." Source: Synology, DSM 7.3, last updated 27 May 2026.
We have not read a Synology spec page stating the DP7200's drive slots. For the series, an unlisted M.2 NVMe SSD is supported for migration from an existing Synology system only.
A drive on Synology's incompatibility list is not supported for a new installation or storage pool, for cache, or for migration - on every series. That is a separate list from the compatibility list: a drive on it is one Synology has tested and found incompatible, which Storage Manager reports as "Incompatible". A drive simply missing from the compatibility list is "Not Listed", the middle column of the table on this page.
Synology announced it on May 28, 2025 ("Synology Expands ActiveProtect Lineup with DP7200, Powering a Unified Vision for Scalable, Secure Data Protection"). It matters because Synology states: "The new drive compatibility policies apply only to new models starting in 2025 and do not apply retroactively to previously launched systems." A model launched before 2025 is outside these tables altogether.
Synology's article is written for "DSM 7.3 and above" and gives no build number and no date for the change, so we print neither. Its last-updated stamp is 2026-05-27; we last read it on 2026-10-05.