DatacenterDisk
Synology

DiskStation DS425+ 4-Bay Diskless

DS425+
DiskStationnas-device0TB2.5GbEDesktop
Check Availability
Quick Verdict

The Synology DiskStation DS425+ 4-Bay Diskless is a 0TB 2.5GbE enterprise drive at $undefined/TB - Verify recording technology before use in RAID. New unit with full 3-year warranty.

Specifications

Capacity0TB
Form FactorDesktop
Interface2.5GbE
Recording Tech—
Sector Size—
Workload Rating—
Warranty3 years
ASINB0F895RV3K

90-Day Price History

Price history will appear here after 24 hours.

Check back tomorrow.

How it compares - 0TB 2.5GbE
#1Synology DiskStation DS425+ 4-Bay DisklessTHIS DRIVE
$—/TB
#2QNAP TS-464 4-Bay Desktop NAS Diskless
$—/TB
#3QNAP TS-664 6-Bay Desktop NAS Diskless
$—/TB

Compare to similar 0TB 2.5GbE drives

QNAP
TS-464 4-Bay Desktop NAS Diskless
$—/TB
$—
QNAP
TS-664 6-Bay Desktop NAS Diskless
$—/TB
$—

Frequently Asked Questions

This 2.5GbE cartridge requires a compatible 2.5GbE tape drive. 2.5GbE drives can also read the previous LTO generation.

BaFe (Barium Ferrite) tape media has an archival life of 30+ years when stored in controlled conditions (18-26°C, 20-50% humidity). Store tapes vertically and avoid magnetic fields.

Yes. LTO is an open standard. This cartridge works in any 2.5GbE-compatible standalone drive or automated tape library regardless of manufacturer.

Use Case Scenarios

🏠
Home & SMB NAS
Building a mid-range NAS for media, backups and file sharing.
~ Good fit
Verify CMR recording before using in RAID. New drives come with full warranty.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
0TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.
🏗️
Virtualization Host Storage
VM images and snapshots on Proxmox, VMware or Hyper-V.
~ Good fit
Suitable for VM storage where workloads are not IOPS-intensive. SATA is fine for single-host VM storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Establishes baseline for future comparison.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 0 hours for 0TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check Synology support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 0TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: Loose SATA data or power cable, failed port, or drive not spinning up.
Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.