Synology 8TB SATA Enterprise HDD - Prices

1 drives tracked. Updated every 4 hours.

Best $/TB

—

Drives

Condition

New

Synology 8TB SATA - worth it?

Synology 8TB SATA enterprise drives available from competitive prices. Compatible with all SATA controllers, NAS, and server platforms.

$/TB ▲	Brand / Model	Cap	Interface	Tech	Cache	Sector	Wty	Price	Cond.	90D	Buy
$—	Synology HAT5300 8TB NAS HAT5300-8T CMR · 5yr	8TB	SATA-6G 7,200 RPM	CMR	256MB	512e	5yr	$—	—		Buy →Details	▼

Drive Specifications

Synology HAT5300 8TB NAS

HAT5300-8T

$—/TB

$— total

Capacity

8TB

Interface

SATA-6G

Form Factor

3.5"

Recording

CMR

RPM

7,200

Cache

256MB

Sector Size

512e

Workload

550TB/yr

Warranty

5 years

Other Synology SATA capacities

4TB 8TB 12TB 16TB 20TB

Other brands at 8TB SATA

Dell Seagate Synology Toshiba WD

Frequently Asked Questions

Synology enterprise 8TB SATA drives listed here use CMR recording and are safe for RAID. Always verify by model number if purchasing from a third party.

Synology 8TB SATA drives are compatible with all major NAS platforms including Synology DiskStation, QNAP, TrueNAS, UnRAID, and any server with SATA ports. Check your NAS manufacturer's compatibility list for confirmed models.

New Synology 8TB SATA drives with manufacturer warranty. Recommended for production NAS and primary storage.

Use Case Scenarios

🏠

Home & SMB NAS

Building a mid-range NAS for media, backups and file sharing.

✓ Excellent fit

CMR recording is RAID-safe and fully compatible with Synology, QNAP, TrueNAS and UnRAID. New drives come with full warranty.

💾

Backup Server / Veeam Target

Dedicated backup storage for Veeam, Commvault, or NetBackup.

✓ Excellent fit

8TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.

🏗️

Virtualization Host Storage

VM images and snapshots on Proxmox, VMware or Hyper-V.

~ Good fit

Suitable for VM storage where workloads are not IOPS-intensive. SATA is fine for single-host VM storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival

Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Establishes baseline for future comparison.

MonthlyRun SMART short self-test

smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.

QuarterlyRun SMART long self-test

smartctl -t long /dev/sdX — full surface scan, takes 4 hours for 8TB. Any test failure is grounds for immediate replacement.

QuarterlyCheck RAID array health

Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.

AnnuallyVerify drive firmware version

Check Synology support site for firmware updates. Some versions have known bugs affecting integrity.

Every 3-5 yearsPlan proactive replacement

Enterprise HDDs have higher failure rates after year 4-5. At 8TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: Loose SATA data or power cable, failed port, or drive not spinning up.

Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.