DatacenterDisk

Toshiba 6TB SATA Enterprise HDD - Prices

1 drives tracked. Updated every 4 hours.

Best $/TB
—
Drives
1
Condition
New

Toshiba 6TB SATA - worth it?

Toshiba 6TB SATA drives include the MG enterprise and N300 NAS series. Solid reliability with competitive pricing from competitive prices.

$/TB ▲Brand / ModelCapInterfaceTechCacheSectorWtyPriceCond.90DBuy
$—
Toshiba
N300 6TB NAS
HDWG460XZSTA
CMR · 3yr
6TB
SATA-6G
7,200 RPM
CMR256MB512e3yr$——Buy →Details▼

Drive Specifications

Toshiba N300 6TB NAS
HDWG460XZSTA
$—/TB
$— total
Capacity
6TB
Interface
SATA-6G
Form Factor
3.5"
Recording
CMR
RPM
7,200
Cache
256MB
Sector Size
512e
Workload
180TB/yr
Warranty
3 years

Other Toshiba SATA capacities

2TB4TB6TB8TB10TB12TB16TB18TB

Other brands at 6TB SATA

MDDSeagateToshibaWD

Frequently Asked Questions

Toshiba enterprise 6TB SATA drives listed here use CMR recording and are safe for RAID. Always verify by model number if purchasing from a third party.

Toshiba 6TB SATA drives are compatible with all major NAS platforms including Synology DiskStation, QNAP, TrueNAS, UnRAID, and any server with SATA ports. Check your NAS manufacturer's compatibility list for confirmed models.

New Toshiba 6TB SATA drives with manufacturer warranty. Recommended for production NAS and primary storage.

Use Case Scenarios

🏠
Home & SMB NAS
Building a mid-range NAS for media, backups and file sharing.
✓ Excellent fit
CMR recording is RAID-safe and fully compatible with Synology, QNAP, TrueNAS and UnRAID. New drives come with full warranty.
💾
Backup Server / Veeam Target
Dedicated backup storage for Veeam, Commvault, or NetBackup.
✓ Excellent fit
6TB SATA drives are ideal for backup targets. SATA gives maximum $/TB for backup repositories.
🏗️
Virtualization Host Storage
VM images and snapshots on Proxmox, VMware or Hyper-V.
~ Good fit
Suitable for VM storage where workloads are not IOPS-intensive. SATA is fine for single-host VM storage. Consider NVMe cache for latency-sensitive VMs.

Maintenance & Troubleshooting

Maintenance Checklist

On installCheck SMART baseline on arrival
Run smartctl -a /dev/sdX and record: Reallocated_Sector_Ct, Power_On_Hours, Spin_Retry_Count. Establishes baseline for future comparison.
MonthlyRun SMART short self-test
smartctl -t short /dev/sdX — takes 1-2 minutes, catches most developing issues. Schedule during off-peak.
QuarterlyRun SMART long self-test
smartctl -t long /dev/sdX — full surface scan, takes 3 hours for 6TB. Any test failure is grounds for immediate replacement.
QuarterlyCheck RAID array health
Verify no degraded drives. A degraded array with no hot spare is one failure from data loss. Check mdstat or controller UI.
AnnuallyVerify drive firmware version
Check Toshiba support site for firmware updates. Some versions have known bugs affecting integrity.
Every 3-5 yearsPlan proactive replacement
Enterprise HDDs have higher failure rates after year 4-5. At 6TB per drive, budget for replacements before failures occur.

Troubleshooting Guide

Cause: Loose SATA data or power cable, failed port, or drive not spinning up.
Fix: Reseat both cables. Try a different port. Listen for spin-up sound. Test with a known-good cable.